منتجات

وطن

مراقبة الاهتزاز

RPS6U 200-582-915-034 Rack Power Supplie

RPS6U 200-582-915-034 Rack Power Supplie

The RPS6U 200-582-915-034 is redundant rack power supply for rotating machinery monitoring systems

  • وسم :

    VM
  • رقم الجزء :

    RPS6U 200-582-915-034
  • وصف :

    Rack Power Supplie
  • أصل :

    Switzerland
  • شرط :

    New
  • البعد :

    40 mm x 40 mm x 24 mm
  • ثقل :

    385 g
  • دفع :

    Bank Transfer
اتصل بنا :

 

RPS6U 200-582-915-034 Rack Power Supplie

 

Description

 

RPS6U (Model 200-582-915-034) is a dedicated power supply module for the 6U rack of the rotating unit monitoring system. It is compatible with the standard chassis of the same series. Through the backplane VME bus, it provides stable +5V and ±12V multi-channel DC voltages for all monitoring cards in the chassis, meeting the power supply requirements for signal acquisition, logic operation, and communication modules. It is widely used in online protection monitoring cabinets of steam turbines and compressors in power plants, petrochemicals, and natural gas industries.

This power supply supports independent power supply of a single module or redundant parallel deployment of two modules. A single unit can fully support the operation of all card components. When one unit fails, the other seamlessly takes over all the loads without the need for shutdown and maintenance. It has multiple protection circuits such as overvoltage, short circuit, and overload protection. It is compatible with wide voltage input to adapt to fluctuations in the on-site power grid. It is equipped with status indicator lights to intuitively reflect the power supply status. In high-temperature environments, the power attenuation is low, ensuring the long-term uninterrupted and stable operation of the unit monitoring system. 

 

Features

 

6U rack-specific power supply unit, compatible with the standard chassis of the rotating equipment monitoring system

Multiple DC outputs, providing unified power supply for all monitoring cards in the chassis

Supports dual power redundancy configuration, automatically switching in case of a single unit failure, without any risk of downtime

Integrated comprehensive electrical protection mechanism for overvoltage, short circuit, and overload

Wide range of AC/DC input, suitable for unstable power supply environments in industrial sites

Equipped with status indicator lights, providing real-time and intuitive display of power operation status

Low power attenuation in high-temperature conditions, suitable for harsh control cabinet environments in chemical and power industries

 

Technical Specifications

 

Manufacturer VM
Part Number RPS6U 
Ordering Information 200-582-915-034
Product Catalog Vibration Monitoring
Description Rack Power Supplie
Voltage 24 Vdc
Current 1A
Dimensions 40 mm x 40 mm x 24 mm
Weight 385 g

 

RPS6U 200-582-915-034

اترك رسالة
 إذا كنت مهتمًا بمنتجاتنا وتريد معرفة المزيد من التفاصيل، فيرجى ترك رسالة هنا، وسنقوم بالرد عليك في أقرب وقت ممكن.

آراء العملاء

Execllent!!

إنها حقًا تجربة رائعة عندما يمكنك العثور على شيء جديد والحصول على سعر رائع! سوف تشتري بالتأكيد مرة أخرى.

Execllent!!

منتجات البائع جيدة جدًا كما هو موضح في التعبئة الجيدة جدًا ووقت التسليم القصير.

Execllent!!

استجابة سريعة جدًا لطلبات عروض الأسعار الخاصة بي ويتم شحن المنتج بسرعة.

Execllent!!

جودة المنتج تجاوزت توقعاتي.

Execllent!!

كان دعم العملاء رائعًا. 

منتجات ذات صله

MPC4 200-510-071-113 Machinery Protection Card
MPC4 200-510-071-113 بطاقة حماية الآلات
ال MPC4 200-510-071-113 البطاقة متعددة الاستخدامات قادرة على قياس ومراقبة ما يصل إلى أربعة مدخلات إشارة ديناميكية وما يصل إلى مدخلين للسرعة في وقت واحد. 7,500.00 دولار.نوعية ممتازة وسعر مناسب، مرحبا بكم في الاستفسار!
MPC4 200-510-150-011 Machinery Protection Card
MPC4 200-510-150-011 بطاقة حماية الآلات
ال MPC4 تعتبر بطاقة حماية الآلات العنصر المركزي في نظام حماية الآلات (MPS). هذه البطاقة متعددة الاستخدامات قادرة على قياس ومراقبة ما يصل إلى أربعة مدخلات إشارة ديناميكية وما يصل إلى مدخلين للسرعة في وقت واحد.
MPC4 200-510-150-031 Machinery Protection Card
MPC4 200-510-150-031 بطاقة حماية الآلات
ال MPC4 تعتبر بطاقة حماية الآلات العنصر المركزي في نظام حماية الآلات (MPS). هذه البطاقة متعددة الاستخدامات قادرة على قياس ومراقبة ما يصل إلى أربعة مدخلات إشارة ديناميكية وما يصل إلى مدخلين للسرعة في وقت واحد. 8,200.00 دولار. مرحبا بكم في الاستفسار!  
MPC4 200-510-078-115 Machinery Protection Card
MPC4 200-510-078-115 بطاقة حماية الآلات
MPC4 200-510-078-115 بطاقة متعددة الاستخدامات قادرة على قياس ومراقبة ما يصل إلى أربعة مدخلات إشارة ديناميكية وما يصل إلى مدخلين للسرعة في وقت واحد. جودة ممتازة، 7500.00 دولار. سعر مناسب، مرحبًا بك للاستفسار!
IOC4T 200-560-000-016 Input/Output Card
IOC4T 200-560-000-016 بطاقة الإدخال / الإخراج
تدعم بطاقة IOC4T 4 قنوات ديناميكية وقناتين لمقياس سرعة الدوران، وكلها قابلة للتكوين بشكل مستقل. يتم تثبيت بطاقة واجهة IOC4T في الجزء الخلفي من الحامل ABE04x، مباشرة خلف بطاقة MPC4 أو بطاقة MPC4SIL، لتكوين زوج بطاقات.يرجى الاتصال بنا.
IOC4T 200-560-000-013 Input/Output Card
IOC4T 200-560-000-013 بطاقة الإدخال / الإخراج
اللوحة الأمامية لل IOC4T 200-560-000-113 (الجزء الخلفي من الحامل VM600) يحتوي على موصلات نطاق طرفية لتوصيل كابل النقل من سلسلة القياس (المستشعر و/أو منظم الإشارة). مرحبا بكم في الاستفسار!
IOC4T 200-560-000-111 Input/Output Card
IOC4T 200-560-000-111 بطاقة الإدخال / الإخراج
ال بطاقة IOC4T يحمي جميع المدخلات والمخرجات ضد التداخل الكهرومغناطيسي (EMI) واندفاع الإشارة ويلبي أيضًا التوافق الكهرومغناطيسي (EMC). 1,700.00 دولار. جودة ممتازة وسعر مناسب، مرحبًا بك للاستفسار!
IOC4T 200-560-000-113 Input/Output Card
IOC4T 200-560-000-113 بطاقة الإدخال / الإخراج
ال بطاقة الإدخال/الإخراج IOC4T تعمل كواجهة إشارة لبطاقة حماية ماكينات MPC4، ويتم تثبيتها في الجزء الخلفي من الحامل وتتصل مباشرة باللوحة الإلكترونية المعززة للحامل عبر موصلين.

هل تحتاج إلى مساعدة؟ اترك رسالة

اترك رسالة
 إذا كنت مهتمًا بمنتجاتنا وتريد معرفة المزيد من التفاصيل، فيرجى ترك رسالة هنا، وسنقوم بالرد عليك في أقرب وقت ممكن.
إرسال

وطن

منتجات

whatsApp

الاتصال